EMSO-LO Western Ligurian : BJS_Bathydock Optode sensors (NetCDF files from 2023-09-20)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories.  It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems.  This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea.  There are currently eleven deep water nodes plus four shallow water test nodes.  EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow.  This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, not applicable)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
DOX1 (oxygen concentration, Micromoles per litre)
... (10 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock, ADCP sensor (NetCDF files from 2023-09-20

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories.  It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems.  This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea.  There are currently eleven deep water nodes plus four shallow water test nodes.  EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow.  This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
HEAD (Heading, degrees)
Head_QC (Heading quality code)
PITCH (degrees)
Pitch_QC (Pitch quality code)
... (26 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock_Bathybot Aquadopp sensor (NetCDF files from 2023-09-20)

Summary:
EMSO-LO Western Ligurian : BathyBot, Aquadopp sensor (Network Common Data Format (NetCDF) files from 2023-04-28). The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, Not applicable)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
Position_QC (quality flag for position)
DEPH (depth of measurements, Metres)
Deph_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
Time_QC (Time quality flag)
EWCT (X_East eastward_sea_water_velocity, Metres per second)
NSCT (Y_North northward_sea_water_velocity, Metres per second)
... (26 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock_Bathybot Microcat sensor (NetCDF files from 2023-09-20)

Summary:
The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, N/A)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, Siemens per metre)
... (5 more variables)


EMSO-SA BB 505 ADCP

Summary:
Oceanographic mooring data from deployment of BB mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water temperature, currents along the water column

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Metres per second)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (deployment_latitude, degrees_north)
longitude (deployment_longitude, degrees_east)
depth (Depth of each measurement, m)
UVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
VVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
WVEL_ADCP (Vertical velocity of the water column (currents), Metres per second)
CurrVel_QC (Quality Control Flag of Current Velocity in the water column)
ECI_B1 (Acoustic backscatter in the water column, Counts)
ECI_B2 (Acoustic backscatter in the water column, Counts)
ECI_B3 (Acoustic backscatter in the water column, Counts)
ECI_B4 (Acoustic backscatter in the water column, Counts)
ECHO_QC (Quality Control Flag of Echo Intensity Signal in the water column)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)

CNR, National Research Council, Institute of Polar Science (CNR - ISP)


EMSO-SA BB 595 CTD

Summary:
Oceanographic mooring data from deployment of BB mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water pressure, temperature, potential_temperature, practical salinity, density, turbidity and dissolved oxygen in sea-water

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Degrees Celsius)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
depth (Depth of each measurement, m)
AHGT (sea water pressure, dbar)
sea_water_pressure_QC (quality control flag of sea_water_pressure)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)
Temperature (Potential Temperature of the sea-water, Degrees Celsius)
PTEMP_QC (quality control flag of sea-water_potential_temperature)
PSAL (Salinity of the sea-water, Dimensionless)
PSAL_QC (quality control flag of pratical salinity of sea water)
SIGT (sea_water_density, Kilograms per cubic metre)
SIGT_QC (quality control flag of sea_water_density)
DOXY (Dissolved oxygen in the water column, Millilitres per litre)
DOXY_QC (quality control flag of Dissolved oxygen in the water column)
TSED (sea_water_turbidity, NTU)
TURB_QC (quality control flag of Turbidity of water)


EMSO-SA FF 644 ADCP

Summary:
Oceanographic mooring data from deployment of FF mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water temperature, currents along the water column

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Metres per second)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
depth (Depth of each measurement, m)
UVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
VVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
WVEL_ADCP (Vertical velocity of the water column (currents), Metres per second)
CurrVel_QC (Quality Control Flag of Current Velocity in the water column)
ECI_B1 (Acoustic backscatter in the water column, Counts)
ECI_B2 (Acoustic backscatter in the water column, Counts)
ECI_B3 (Acoustic backscatter in the water column, Counts)
ECI_B4 (Acoustic backscatter in the water column, Counts)
ECHO_QC (Quality Control Flag of Echo Intensity Signal in the water column)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)


EMSO-SA FF 734 CTD

Summary:
Oceanographic mooring data from deployment of FF mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water pressure, temperature, potential_temperature, practical salinity, density, turbidity and dissolved oxygen in sea-water

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Degrees Celsius)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
depth (Depth of each measurement, m)
AHGT (sea water pressure, dbar)
sea_water_pressure_QC (quality control flag of sea_water_pressure)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)
Temperature (Potential Temperature of the sea-water, Degrees Celsius)
PTEMP_QC (quality control flag of sea-water_potential_temperature)
PSAL (Salinity of the sea-water, Dimensionless)
PSAL_QC (quality control flag of pratical salinity of sea water)
SIGT (sea_water_density, Kilograms per cubic metre)
SIGT_QC (quality control flag of sea_water_density)
DOXY (Dissolved oxygen in the water column, Millilitres per litre)
DOXY_QC (quality control flag of Dissolved oxygen in the water column)
TSED (sea_water_turbidity, NTU)
TURB_QC (quality control flag of Turbidity of water)


ESTOC Chlorophyll and Turbidity Data (at 100m) 2015

Summary:
Sea water data collected at ESTOC mooring at 29.17 degrees North at 15.529 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
wetlabs_SNFLNTUSB3869 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC Chlorophyll and Turbidity Data (at 140m) 2016

Summary:
Sea water data collected at ESTOC mooring at 29.193 degrees North at 15.608 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
wetlabs_SN4039 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC Chlorophyll and Turbidity Data (at 80m) 2017

Summary:
Sea water data collected at ESTOC mooring at 29.18 degrees North at 15.518 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
wetlabs_SNFLNTUSB3869 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC Chlorophyll and Turbidity Data 2016

Summary:
Sea water data collected at ESTOC mooring at 29.193 degrees North at 15.608 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
turnerdesigns_SN2180461 (Turner Designs Cyclops-7 chlorophyll fluorometer)
wetlabs_SNFLNTUSB3869 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC Chlorophyll and Turbidity Data 2017-2018

Summary:
Sea water data collected at ESTOC mooring at 29.18 degrees North at 15.518 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
wetlabs_SNFLNTUSB4040 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD Data (at 1600m) 2018-2019

Summary:
Sea water data collected at ESTOC mooring at 29.23 degrees North at 15.517 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
TEMP (Sea water temperature, degC)
CNDC (sea water electrical conductivity, S/m)
PSAL (sea water salinity, Dmnless)
TEMP_QC (Sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
seabirdscientific_SN15013 (Sea-Bird SBE 37 MicroCat SM-CT with optional pressure (submersible) CTD sensor series)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD Data (at 80m) 2016

Summary:
Sea water data collected at ESTOC mooring at 29.163 degrees North at 15.608 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
TEMP (Sea water temperature, degC)
CNDC (sea water electrical conductivity, S/m)
PSAL (sea water salinity, Dmnless)
TEMP_QC (Sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
seabirdscientific_SN14406 (Sea-Bird SBE 37 MicroCat IMP-CT-ODO (submersible) CTD sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD Data 2014-2015

Summary:
Sea water data collected at ESTOC mooring at 29.23 degrees North at 15.517 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
TEMP (Sea water temperature, degC)
CNDC (sea water electrical conductivity, S/m)
PSAL (sea water salinity, Dmnless)
TEMP_QC (Sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
seabirdscientific_SN9226 (Sea-Bird SBE 37 MicroCat SMP-CT with optional pressure (submersible) CTD sensor series)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD Data 2015-2016

Summary:
Sea water data collected at ESTOC mooring at 29.17 degrees North at 15.529 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
TEMP (Sea water temperature, degC)
CNDC (sea water electrical conductivity, S/m)
PSAL (sea water salinity, Dmnless)
TEMP_QC (Sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
seabirdscientific_SN9227 (Sea-Bird SBE 37 MicroCat SMP-CT with optional pressure (submersible) CTD sensor series)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD-Oxygen-Chlorophyll and Turbidity Data 2018-2019

Summary:
Meteorological data collected at ESTOC mooring at 29.19 degrees North at 15.542 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
DOXY (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water, umol/l)
DOXY_TEMP (temperature of sensor for oxygen in sea water, degC)
TEMP (Sea water temperature, degC)
PSAL (sea water salinity, Dmnless)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
DOXY_QC (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water quality control flags)
DOXY_TEMP_QC (temperature of sensor for oxygen in sea water quality control flags)
TEMP_QC (Sea water temperature quality control flags)
PSAL_QC (sea water salinity quality control flags)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
seabirdscientific_SN14295 (Sea-Bird SBE 37 MicroCat SM-CT with optional pressure (submersible) CTD sensor series)
aanderaa_SN672 (Aanderaa 4835 oxygen optode)
wetlabs_SN4039 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD-Oxygen-Chlorophyll and Turbidity Data 2019

Summary:
Meteorological data collected at ESTOC mooring at 29.177 degrees North at 15.518 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
DOXY (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water, umol/l)
DOXY_TEMP (temperature of sensor for oxygen in sea water, degC)
TEMP (Sea water temperature, degC)
PSAL (sea water salinity, Dmnless)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
DOXY_QC (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water quality control flags)
DOXY_TEMP_QC (temperature of sensor for oxygen in sea water quality control flags)
TEMP_QC (Sea water temperature quality control flags)
PSAL_QC (sea water salinity quality control flags)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
seabirdscientific_SN14294 (Sea-Bird SBE 37 MicroCat SM-CT with optional pressure (submersible) CTD sensor series)
aanderaa_SN736 (Aanderaa 4835 oxygen optode)
wetlabs_SNFLNTUSB3869 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD-Oxygen-Chlorophyll and Turbidity-Carbon System Data 2016

Summary:
Oceanographic data collected at ESTOC mooring at 29.16 egrees North at -15.608 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
DOXY (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water, umol/l)
PCO2 (surface partial pressure of carbon dioxide in sea water, ppm)
TEMP (Sea water temperature, degC)
PSAL (sea water salinity, Dmnless)
PHPH (surface pH in sea water, pH units)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
DOXY_QC (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water quality control flags)
PCO2_QC (surface partial pressure of carbon dioxide in sea water quality control flags)
TEMP_QC (Sea water temperature quality control flags)
PSAL_QC (sea water salinity quality control flags)
PHPH_QC (surface pH in sea water quality control flags)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
seabirdscientific_SN14297 (Sea-Bird SBE 37 MicroCat SM-CT with optional pressure (submersible) CTD sensor series)
jfeadvantech_SN0079 (JFE Advantech Rinko II {ARO-CAR/CAD} oxygen sensor)
sensorlab_SN041650014 (SensorLab SP200-SM (High accuracy Submarine) pH sensor)
wetlabs_SNFLNTUSB_4040 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
prooceanus_SN28_090_45 (Pro-Oceanus CO2-Pro CV submersible pCO2 sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD-pH Data 2017

Summary:
Sea water data collected at ESTOC mooring at 29.23 degrees North at 15.517 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
TEMP (Sea water temperature, degC)
PSAL (sea water salinity, Dmnless)
PHPH (surface pH in sea water, pH units)
TEMP_QC (Sea water temperature quality control flags)
PSAL_QC (sea water salinity quality control flags)
PHPH_QC (surface pH in sea water quality control flags)
seabirdscientific_SN14293 (Sea-Bird SBE 37 MicroCat SM-CT with optional pressure (submersible) CTD sensor series)
sensorlab_SN041650013 (SensorLab SP200-SM (High accuracy Submarine) pH sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC Meteorological Data 2003-2008

Summary:
Meteorological data collected by Bremen University at ESTOC mooring at 29.19 degrees North at 15.92 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
AIRT (Air temperature, degC)
ATMP (Atmospheric pressure at altitude, mBar)
RELH (Relative humidity, %)
AIRT_QC (Air temperature quality control flags)
ATMP_QC (Atmospheric pressure at altitude quality control flags)
RELH_QC (Relative humidity quality control flags)
vaisala_SNunknown (Vaisala PTU200 pressure, humidity and temperature transmitter series)
ESTOC_ODAS_Mooring_Platform


ESTOC Meteorological Data 2014

Summary:
Meteorological data collected at ESTOC mooring at 29.161 degrees North at 15.585 degrees W from 02-Jun-2014 to 22-Dec-2014

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
AIRT (Air temperature, degC)
RELH (Relative humidity, %)
ATMP (Atmospheric pressure at altitude, mBar)
WDIR (Wind from direction relative true north, deg T)
WSPD (Horizontal wind speed, m/s)
AIRT_QC (Air temperature quality control flags)
RELH_QC (Relative humidity quality control flags)
ATMP_QC (Atmospheric pressure at altitude quality control flags)
WDIR_QC (Wind from direction relative true north quality control flags)
WSPD_QC (Horizontal wind speed quality control flags)
vaisala_SNG0450011 (Vaisala HUMICAP 180R HMP155 humidity and temperature probe)
vaisala_SNG0520009 (Vaisala PTB110 barometer)
vaisala_SNJ3120014 (Vaisala WXT520 weather transmitter)
ESTOC_ODAS_Mooring_Platform


ESTOC Meteorological Data 2015-2019

Summary:
Meteorological data collected at ESTOC mooring at 29.16 degrees North at 15.5 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
LGH4 (Photosynthetically active radiationÂ (PAR), umol/m^2/s)
WDIR (Wind from direction relative true north, deg T)
WSPD (Horizontal wind speed, m/s)
AIRT (Air temperature, degC)
ATMP (Atmospheric pressure at altitude, mBar)
RELH (Relative humidity, %)
LGH4_QC (Photosynthetically active radiationÂ (PAR) quality control flags)
WDIR_QC (Wind from direction relative true north quality control flags)
WSPD_QC (Horizontal wind speed quality control flags)
AIRT_QC (Air temperature quality control flags)
ATMP_QC (Atmospheric pressure at altitude quality control flags)
RELH_QC (Relative humidity quality control flags)
vaisala_SNK0610023 (Vaisala HUMICAP 180R HMP155 humidity and temperature probe)
rmyoung_SNWM115058 (R.M. Young 05103 Wind Monitor anemometer)
apogeeinstrumentsinc_SN4304 (Apogee SQ Quantum PAR sensor series)
vaisala_SNK0250013 (Vaisala PTB110 barometer)
vaisala_SNM0310241 (Vaisala HUMICAP 180R HMP155 humidity and temperature probe)
vaisala_SNM0310065 (Vaisala PTB110 barometer)
rmyoung_SN145936 (R.M. Young 05103 Wind Monitor anemometer)
apogeeinstrumentsinc_SN5429 (Apogee SQ Quantum PAR sensor series)
vaisala_SNJ3120014 (Vaisala WXT520 weather transmitter)
apogeeinstrumentsinc_SN6622 (Apogee SQ Quantum PAR sensor series)
ESTOC_ODAS_Mooring_Platform


EUXRoOB01 DATA - 2024

Summary:
Data acquired by EUXRoOB01 (Black Sea offshore buoy) in 2024

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CPWC (EUXRoOB01 Chlorophyll Concentration, Micrograms per litre)
DOXY (EUXRoOB01 Oxygen Concentration, Micromoles per litre)
TSED (EUXRoOB01 Water Turbidity, Nephelometric Turbidity Units)
CNDC (EUXRoOB01 Water Conductivity, MilliSiemens per centimetre)
CSPD (EUXRoOB01 Water Current Speed, Metres per second)
CDIR (EUXRoOB01 Water Current Direction, Degrees)
TEMP (EUXRoOB01 Water Temperature, Degrees Celsius)
PRES (EUXRoOB01 Water Pressure, Decibars)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)

National Institute of Marine Geology and Geoecology


EUXRoOB02 DATA - 2024

Summary:
Data acquired by EUXRoOB02 (Black Sea offshore buoy) in 2024

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CPWC (EUXRoOB02 Chlorophyll Concentration, Micrograms per litre)
DOXY (EUXRoOB02 Oxygen Concentration, Micromoles per litre)
TSED (EUXRoOB02 Water Turbidity, Nephelometric Turbidity Units)
CNDC (EUXRoOB02 Water Conductivity, MilliSiemens per centimetre)
CSPD (EUXRoOB02 Water Current Speed, Metres per second)
CDIR (EUXRoOB02 Water Current Direction, Degrees)
TEMP (EUXRoOB02 Water Temperature, Degrees Celsius)
PRES (EUXRoOB02 Water Pressure, Decibars)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


EUXRoOB03 DATA - 2024

Summary:
Data acquired by EUXRoOB03 (Black Sea offshore buoy) in 2024

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CPWC (EUXRoOB03 Chlorophyll Concentration, Micrograms per litre)
DOXY (EUXRoOB03 Oxygen Concentration, Micromoles per litre)
TSED (EUXRoOB03 Water Turbidity, Nephelometric Turbidity Units)
CNDC (EUXRoOB03 Water Conductivity, MilliSiemens per centimetre)
CSPD (EUXRoOB03 Water Current Speed, Metres per second)
CDIR (EUXRoOB03 Water Current Direction, Degrees)
TEMP (EUXRoOB03 Water Temperature, Degrees Celsius)
PRES (EUXRoOB03 Water Pressure, Decibars)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


INSEA Calipso Pressure gauge data

Summary:
This sensor measures the hydrostatic (water column) pressure exerted on the sensor.

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
longitude (longitude of measurements, degrees_east)
latitude (latitude of measurements, degrees_north)
PRES (pressure, decibar)
TIME_QC (TIME quality control flags)
DEPTH_QC (DEPTH quality control flags)
POSITION_QC (POSITION quality control flags)

Istituto Nazionale Geofisica e Vulcanologia - Sez. Roma2


INSEA Dione Pressure gauge data


Med Sea, Cretan Sea, NRT in situ Observations

Summary:
Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Summary:
Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Summary:
Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Summary:
Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PHPH (Ph, 1)
PHPH_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Summary:
Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PHPH (Ph, 1)
PHPH_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Summary:
Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PHPH (Ph, 1)
PHPH_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
... (24 more variables)


Summary:
Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Summary:
Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR
GDIR_QC
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Summary:
Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Summary:
Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea, Hellenic Arc, NRT in situ Observations

Summary:
Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0 (Spectral significant wave height (Hm0), m)
VHM0_QC (quality flag)
VMDR (Mean wave direction from (Mdir), degree)
VMDR_QC (quality flag)
VTM02 (Spectral moments (0,2) wave period (Tm02), s)
VTM02_QC (quality flag)
... (14 more variables)


Summary:
Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DRYT (degree_C)
DRYT_QC
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0
VHM0_QC
VMDR
VMDR_QC
VTM02
VTM02_QC
... (14 more variables)


Summary:
Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DRYT (degree_C)
DRYT_QC
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0
VHM0_QC
VMDR
VMDR_QC
VTM02
VTM02_QC
... (12 more variables)


Summary:
Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0 (Spectral significant wave height (Hm0), m)
VHM0_QC (quality flag)
VMDR (Mean wave direction from (Mdir), degree)
VMDR_QC (quality flag)
VTM02 (Spectral moments (0,2) wave period (Tm02), s)
VTM02_QC (quality flag)
VTPK (Wave period at spectral peak / peak period (Tp), s)
VTPK_QC (quality flag)
... (12 more variables)


Summary:
Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DRYT (degree_C)
DRYT_QC
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0
VHM0_QC
VMDR
VMDR_QC
VTM02
VTM02_QC
... (14 more variables)


Summary:
Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Summary:
Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Summary:
Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Summary:
Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR
GDIR_QC
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Summary:
Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1
DOX1_QC
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Meteorological time series at OBSEA moored buoy (30min averages)

Summary:
Meteorological time series at OBSEA moored buoy, quality controlled data with 30-minute average, data from 2011-10-06 until now

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
AIRT (temperature of the atmoshpere, degC)
CAPH (Atmospheric pressure, hPa)
WDIR (wind direction, degree_north)
WSPD (wind speed, m/s)
AIRT_QC (temperature of the atmoshpere quality control flags)
CAPH_QC (Atmospheric pressure quality control flags)
WDIR_QC (wind direction quality control flags)
WSPD_QC (wind speed quality control flags)
Airmar_150WX_SN57323 (Airmar 150WX Weather Station)
Airmar_200WX_SN60390327 (Airmar 200WX IPX7 weather station)
OBSEA_Besos_Buoy (OBSEA Buoy on top of the seafloor observatory)
OBSEA_Buoy (OBSEA Buoy on top of the seafloor observatory)

UPC - Universitat Politècnica de Catalunya


Meteorological time series at OBSEA moored buoy (quality-controlled)

Summary:
Meteorological time series at OBSEA moored buoy, quality controlled, data from 2011-10-06 until now

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
AIRT (temperature of the atmoshpere, degC)
CAPH (Atmospheric pressure, hPa)
WDIR (wind direction, degree_north)
WSPD (wind speed, m/s)
AIRT_QC (temperature of the atmoshpere quality control flags)
CAPH_QC (Atmospheric pressure quality control flags)
WDIR_QC (wind direction quality control flags)
WSPD_QC (wind speed quality control flags)
Airmar_150WX_SN57323 (Airmar 150WX Weather Station)
Airmar_200WX_SN60390327 (Airmar 200WX IPX7 weather station)
OBSEA_Besos_Buoy (OBSEA Buoy on top of the seafloor observatory)
OBSEA_Buoy (OBSEA Buoy on top of the seafloor observatory)


NEMO-SN1 Observatory CTD data (2002-2003)

Summary:
The dataset contains sea bottom Conductivity, Temperature and Pressure data (about 1 m above the bottom) acquired through a SBE 37-SM installed on SN-1 station. The collection period ranges from October 2002 through February 2003.

cdm_data_type = TimeSeries
VARIABLES:
depth (depth of measurements, m)
longitude (longitude of measurements, degrees_east)
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TEMP (temperature, degree_C)
CNDC (conductivity, MilliSiemens per centimetre)
PRES (pressure, Decibar)
DEPTH_QC (Depth quality flag)
CNDC_QC (Conductivity quality flag)
POSITION_QC (Position quality flag)
TEMP_QC (Temperature quality flag)
TIME_QC (Time quality flag)
PRES_QC (Pressure quality flag)


NEMO-SN1 Observatory CTD data (2012-2013)

Summary:
The dataset contains sea bottom Conductivity, Temperature and Pressure data (about 1 m above the bottom) acquired through a SBE 37-SM installed on SN-1 station.

cdm_data_type = TimeSeries
VARIABLES:
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
longitude (longitude of measurements, degrees_east)
TEMP (temperature, degree_C)
CNDC (conductivity, MilliSiemens per centimetre)
PRES (pressure, Decibar)
CNDC_QC (Conductivity quality flag)
PRES_QC (Pressure quality flag)
POSITION_QC (Position quality flag)
TEMP_QC (Temperature quality flag)
TIME_QC (Time quality flag)
DEPTH_QC (Depth quality flag)


NEMO-SN1 Observatory Observatory Pressure Gauge data

Summary:
This sensor measures the hydrostatic (water column) pressure exerted on the sensor resulting from the pressure of water above its position and the atmospheric air pressure acting on the sea surface.

cdm_data_type = TimeSeries
VARIABLES:
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
PRES (pressure, decibar)
TIME_QC (Time quality flag)
POSITION_QC (Position quality flag)
DEPTH_QC (Depth quality flag)
PRES_QC (Pressure quality flag)


Smart Cable Repeater 1 Pressure Gauge data

Summary:
This sensor is located at the Repeater 1 (station WIS03 located at 37.56 N 15.43 E depth 2033 m) and measures the hydrostatic (water column) pressure exerted on the sensor resulting from the pressure of water above its position and the atmospheric air pressure acting on the sea surface. Pressure data values are in bar.

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
longitude (longitude of measurements, degrees_east)
latitude (latitude of measurements, degrees_north)
PRES (pressure, decibar)
TIME_QC (TIME quality control flags)
DEPTH_QC (DEPTH quality control flags)
POSITION_QC (POSITION quality control flags)


Smart Cable Repeater 2 Pressure Gauge data

Summary:
This sensor is located at the Repeater 2 (station WIS04 located at 35.57 N 15.50 E depth 1992 m) and measures the hydrostatic (water column) pressure exerted on the sensor resulting from the pressure of water above its position and the atmospheric air pressure acting on the sea surface. Pressure data values are in bar.

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
longitude (longitude of measurements, degrees_east)
latitude (latitude of measurements, degrees_north)
PRES (pressure, decibar)
TIME_QC (TIME quality control flags)
DEPTH_QC (DEPTH quality control flags)
POSITION_QC (POSITION quality control flags)


Smart Cable Repeater 3 Pressure Gauge data

Summary:
This sensor is located at the Repeater 3 (station WIS05 located at 37.61 N 15.55 E depth 1917 m) and measures the hydrostatic (water column) pressure exerted on the sensor resulting from the pressure of water above its position and the atmospheric air pressure acting on the sea surface. Pressure data values are in bar.

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
longitude (longitude of measurements, degrees_east)
latitude (latitude of measurements, degrees_north)
PRES (pressure, decibar)
TIME_QC (TIME quality control flags)
DEPTH_QC (DEPTH quality control flags)
POSITION_QC (POSITION quality control flags)


SmartBay Observatory ADCP Data (Processed)

Summary:
The SmartBay Observatory in Galway Bay is an important contribution by Ireland to the growing global network of real-time data capture systems deployed within the ocean. Installed on the seafloor 1.5km off the coast of Spiddal, the observatory uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. Data relating to the marine environment at the site is transferred in real-time from the SmartBay Observatory through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publicly available on the internet.

This dataset comprises of processed data that has been collected from the SmartBay Observatory site using a Nortek Signature 500 Acoustic Doppler Current Profiler (ADCP) (formerly a Teledyne RDI Workhorse Broadband 600KHz - see history below), which is used to measure water current velocities in the seawater above the observatory.

The ADCP is mounted approximately two metres above the seabed, looking up towards the sea surface. Data are collected every minute for 1.0m depth segments or "bins" from approximately 1 metre above the instrument to the surface.

This dataset comprises of the processed CSV data files containing the velocity measurements.

Practical uses of this dataset include but are not limited to scientists, researchers and marine technologists involved in the area of Physical Oceanography.

This is a continuously updating dataset and includes data collected using a now retired sensor. The timeline of sensor use is as follows:
Oct 2015 - Nov 2021 - Teledyne RDI Workhorse Broadband 600KHz
Dec 2024 - present - Nortek Signature 500

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
... (45 more variables)


SmartBay Observatory Combined Sensor Dataset - 1 day average (August 2015 - Present)

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. It was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean.

Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publicly available on the internet. This includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water.

This dataset comprises a summary of numerical data collected from instruments and sensors on the observatory averaged out over a period of a day. The data includes temperature, conductivity, pressure, salinity, sound velocity, oxygen concentration, chlorophyll concentration, turbidity, water velocity and sound level measurements of the seawater.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
SWD_shellfish_waterbody (Shellfish Water Directive shellfish water, Not applicable)
... (61 more variables)


SmartBay Observatory Combined Sensor Dataset - 1 hour average (August 2015 - Present)

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. It was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean.

Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publicly available on the internet. This includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water.

This dataset comprises a summary of numerical data collected from instruments and sensors on the observatory averaged out over a period of an hour. The data includes temperature, conductivity, pressure, salinity, sound velocity, oxygen concentration, chlorophyll concentration, turbidity, water velocity and sound level measurements of the seawater.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
SWD_shellfish_waterbody (Shellfish Water Directive shellfish water, Not applicable)
... (61 more variables)


SmartBay Observatory Combined Sensor Dataset - 15 minute average (August 2015 - Present)

Summary:
The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. It was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean.

Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publicly available on the internet. Included is a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water.

This dataset comprises a summary of numerical data collected from instruments and sensors on the observatory averaged out over a 15-minute period. The data includes temperature, conductivity, pressure, salinity, sound velocity, oxygen concentration, chlorophyll concentration, turbidity, water velocity and sound level measurements of the seawater.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
SWD_shellfish_waterbody (Shellfish Water Directive shellfish water, Not applicable)
... (61 more variables)


SmartBay Observatory CTD and Oxygen Data (Processed)

Summary:
The SmartBay Observatory in Galway Bay is an important contribution by Ireland to the growing global network of real-time data capture systems deployed within the ocean. Installed on the seafloor 1.5km off the coast of Spiddal, the observatory uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. Data relating to the marine environment at the site is transferred in real-time from the SmartBay Observatory through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publicly available on the internet.

This dataset comprises of processed data that has been collected from the SmartBay Observatory site using a Seabird SBE 16 Conductivity-Temperature-Depth (CTD) sensor (formerly using an Idronaut Ocean-Seven 304 plus sensor - see history below). The sensor is located on the Observatory at a depth of 25m.

The sensor measures the temperature, conductivity, pressure and oxygen concentration of the seawater. Salinity, oxygen saturation and sound velocity are calculated from these measurements and included in the dataset. This dataset comprises of the processed CSV data files containing these measurements.

Practical uses of this dataset include but are not limited to scientists, researchers and marine technologists involved in the area of Physical Oceanography.

This is a continuously updating dataset and includes data collected using a now retired sensor. The timeline of sensor use is as follows:
Oct 2015 - Nov 2018 - Idronaut Ocean-Seven 304 plus
Oct 2021 - present - Seabird SBE 16

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
... (30 more variables)


Summary:
The SmartBay Observatory in Galway Bay is an important contribution by Ireland to the growing global network of real-time data capture systems deployed within the ocean. Installed on the seafloor 1.5km off the coast of Spiddal, the observatory uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. Data relating to the marine environment at the site is transferred in real-time from the SmartBay Observatory through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publicly available on the internet.

This dataset comprises of processed data that has been collected from the SmartBay Observatory site using a Seabird SBE 16 Conductivity-Temperature-Depth (CTD) sensor (formerly using an Idronaut Ocean-Seven 304 plus sensor - see history below). The sensor is located on the Observatory at a depth of 25m.

The sensor measures the temperature, conductivity, pressure and oxygen concentration of the seawater. Salinity, oxygen saturation and sound velocity are calculated from these measurements and included in the dataset. This dataset comprises of the processed CSV data files containing these measurements.

Practical uses of this dataset include but are not limited to scientists, researchers and marine technologists involved in the area of Physical Oceanography.

This is a continuously updating dataset and includes data collected using a now retired sensor. The timeline of sensor use is as follows:
Oct 2015 - Nov 2018 - Idronaut Ocean-Seven 304 plus
Oct 2021 - present - Seabird SBE 16

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
... (31 more variables)


SmartBay Observatory Fluorometer Data (Processed)

Summary:
The SmartBay Observatory in Galway Bay is an important contribution by Ireland to the growing global network of real-time data capture systems deployed within the ocean. Installed on the seafloor 1.5km off the coast of Spiddal, the observatory uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. Data relating to the marine environment at the site is transferred in real-time from the SmartBay Observatory through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publicly available on the internet.

A WetLabs ECO-FLNTU fluorometer is installed on the observatory infrastructure. It measures the fluorescence of the seawater to give an estimate of the volume of chlorophyll present (indicative of the amount of phytoplankton in the seawater) and it measures turbidity, or the 'cloudiness' of the seawater, caused by the presence of particles such as sediment from the seabed suspended in the water.

This dataset comprises of measurements taken from the fluorometer, including the concentration of chlorophyll and the turbidity of the seawater.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
SWD_shellfish_waterbody (Shellfish Water Directive shellfish water, Not applicable)
comp4_assessment_area_name (OSPAR Comp4 Assessment Area Name, Not applicable)
transect (Named transect of repeat stations, Not applicable)
... (12 more variables)


SmartBay Observatory Hydrophone Data (Processed)

Summary:
The SmartBay Observatory in Galway Bay is an important contribution by Ireland to the growing global network of real-time data capture systems deployed within the ocean. Installed on the seafloor 1.5km off the coast of Spiddal, the observatory uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. Data relating to the marine environment at the site is transferred in real-time from the SmartBay Observatory through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publicly available on the internet.

This dataset comprises of processed acoustic data that has been collected from the observatory site using an icListen HF Smart Hydrophone - a digital hydrophone that processes and stores acoustic data. This dataset contains Sound Pressure Level (SPL) measurement data taken by the hydrophone at different frequencies.

Practical uses of this dataset includes but are not limited to scientists, researchers and marine technologists involved in the areas of marine mammal monitoring, real-time noise measurement, environmental assessment and improving compliance with the Marine Strategy Framework Directive.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
SWD_shellfish_waterbody (Shellfish Water Directive shellfish water, Not applicable)
comp4_assessment_area_name (OSPAR Comp4 Assessment Area Name, Not applicable)
... (21 more variables)


SmartBay Observatory pCO2 Data (Processed)

Summary:
The SmartBay Observatory in Galway Bay is an important contribution by Ireland to the growing global network of real-time data capture systems deployed within the ocean. Installed on the seafloor 1.5km off the coast of Spiddal, the observatory uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. Data relating to the marine environment at the site is transferred in real-time from the SmartBay Observatory through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publicly available on the internet.

A CONTROS HydroC CO2 sensor is installed on the observatory infrastructure. This dataset comprises of the measurements taken from the sensor, which measures the partial pressure of CO2 in the seawater.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
SWD_shellfish_waterbody (Shellfish Water Directive shellfish water, Not applicable)
comp4_assessment_area_name (OSPAR Comp4 Assessment Area Name, Not applicable)
transect (Named transect of repeat stations, Not applicable)
station_id (Station name, Not applicable)
site_bathy_depth (sea floor depth below sea surface, m)
instrument_id (Not applicable)
data_modified (Date and time the data fields were last modified, seconds since 1970-01-01T00:00:00Z)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
... (5 more variables)


Sound Pressure Level time series at OBSEA seabed observatory (30min averages)

Summary:
Sound Pressure Level (SPL) time series derived from passive acoustic recordings at the OBSEA seabed observatory. Data are computed following Marine Strategy Framework Directive (MSFD) guidelines. SPL values are calculated in 1/3-octave bands (63 Hz, 125 Hz and 2 kHz) using 10-second time windows. Data is averaged every 30 minutes

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
SPL_125 (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, dB)
SPL_2000 (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, dB)
SPL_63 (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, dB)
SPL_all (Sound pressure level (SPL) of ambient noise calculated using the hydrophone's full bandwidth with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap., dB)
SPL_125_QC (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_2000_QC (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_63_QC (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_all_QC (Sound pressure level (SPL) of ambient noise calculated using the hydrophone's full bandwidth with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap. quality control flags)
NAXYS_SN0010 (Hydrophone NAXYS Ethernet 02345)
OBSEA (OBSEA Expandable Seafloor Observatory (WMO number 6103565))


Sound Pressure Level time series at OBSEA seabed observatory (quality-controlled)

Summary:
Sound Pressure Level (SPL) time series derived from passive acoustic recordings at the OBSEA seabed observatory. Data are computed following Marine Strategy Framework Directive (MSFD) guidelines. SPL values are calculated in 1/3-octave bands (63 Hz, 125 Hz and 2 kHz) using 10-second time windows.

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
SPL_125 (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, dB)
SPL_2000 (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, dB)
SPL_63 (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, dB)
SPL_all (Sound pressure level (SPL) of ambient noise calculated using the hydrophone's full bandwidth with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap., dB)
SPL_125_QC (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_2000_QC (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_63_QC (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_all_QC (Sound pressure level (SPL) of ambient noise calculated using the hydrophone's full bandwidth with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap. quality control flags)
NAXYS_SN0010 (Hydrophone NAXYS Ethernet 02345)
OBSEA (OBSEA Expandable Seafloor Observatory (WMO number 6103565))


Temperature and salinity time series at OBSEA seabed observatory (30min averages)

Summary:
Temperature and salinity time series at OBSEA seabed observatory, quality controlled data aggregated every 30min

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CNDC (sea water electrical conductivity, S/m)
PRES (pressure that exists in the medium of sea water, dbar)
PSAL (sea water salinity, PSU)
SVEL (speed of sound in sea water, m/s)
TEMP (in situ sea water temperature, degC)
CNDC_QC (sea water electrical conductivity quality control flags)
PRES_QC (pressure that exists in the medium of sea water quality control flags)
PSAL_QC (sea water salinity quality control flags)
SVEL_QC (speed of sound in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
SBE16_SN57353_6479 (SBE 16 Plus V2)
SBE37SI_SN37_24580 (SBE37 CTD sensor at OBSEA)
SBE37SMP_SN47472_5496 (CTD SBE37 at OBSEA)
OBSEA (OBSEA Expandable Seafloor Observatory (WMO number 6103565))


Temperature and salinity time series at OBSEA seabed observatory (quality-controlled)

Summary:
Temperature and salinity time series at OBSEA seabed observatory, quality controlled

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CNDC (sea water electrical conductivity, S/m)
PRES (pressure that exists in the medium of sea water, dbar)
PSAL (sea water salinity, Dmnless)
SVEL (speed of sound in sea water, m/s)
TEMP (in situ sea water temperature, degC)
CNDC_QC (sea water electrical conductivity quality control flags)
PRES_QC (pressure that exists in the medium of sea water quality control flags)
PSAL_QC (sea water salinity quality control flags)
SVEL_QC (speed of sound in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
SBE16_SN57353_6479 (SBE 16 Plus V2)
SBE37SI_SN37_24580 (SBE37 CTD sensor at OBSEA)
SBE37SMP_SN47472_5496 (CTD SBE37 at OBSEA)
OBSEA (OBSEA Expandable Seafloor Observatory (WMO number 6103565))


W1M3A data (201401-201506)

Summary:
Data from W1M3A observatory (012014-062015)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


W1M3A data (201506-201606)

Summary:
Data from W1M3A observatory (062015-062016)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


W1M3A data (201607-201705)

Summary:
Data from W1M3A observatory (072016-052017)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


W1M3A data (201705-201806)

Summary:
Data from W1M3A observatory (052017-062018)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


W1M3A data (202010-202107)

Summary:
Data from W1M3A observatory (102020-072021)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, NTU)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
... (7 more variables)


W1M3A data (202107-202204)

Summary:
Data from W1M3A observatory (072021-042022)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, NTU)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
... (7 more variables)


W1M3A data (202310-202405)

Summary:
Data from W1M3A observatory (102023-052024)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, MilliSiemens per centimetre)
CNDC_QC (Conductivity quality flag)
DOX1 (Dissolved oxygen, Millilitres per litre)
DOX1_QC (Conductivity quality flag)
FLU2 (Chlorophyll-a fluorescence, Milligrams per cubic metre)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, Nephelometric Turbidity Units)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
... (9 more variables)


W1M3A data (202407-202508)

Summary:
Data from W1M3A observatory (072024-...)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
POSITION_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
sensor_id
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, MilliSiemens per centimetre)
CNDC_QC (Conductivity quality flag)
DOX1 (Dissolved oxygen, Millilitres per litre)
DOX1_QC (Conductivity quality flag)
FLU2 (Chlorophyll-a fluorescence, Milligrams per cubic metre)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, Nephelometric Turbidity Units)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
... (12 more variables)