EMSO-LIGURE NICE, Pressure and temperature data from piezometer MAR2-PZML-01 from July 2021 to September 2024

This dataset contains the pressure and temperature data acquired by piezometer MAR2-PZML-01 from July 2021 following its deployment during the MaRoLiS cruise until its recovery in September 2024 during the STEP2024 cruise. It was connected to the EMSO-Ligure Nice cabled observatory. Pressure has been measured together with temperature at seven different levels below seafloor. The P1 and P7 absolute pressure sensors have recorded the ambient pressure of the water column through the seawater-filled interior of the piezometer shaft. The P2 to P6 differential pressure sensors have recorded fluid pressure in the sediment pores relative to the water column pressure.

cdm_data_type = TimeSeries
VARIABLES:
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (Depth below sea floor, m)
SE_DEPH_QC (quality flag quality flag)
TIME_QC (quality flag quality flag)
SE_TEMP (Solid earth temperature, degree_C)
SE_PRES (Solid earth differential pore pressure, dbar)
SE_TEMP_QC (quality flag quality flag)
SE_PRES_QC (quality flag quality flag)
LEVEL (1)


EMSO-LO Western Ligurian : BJS_Bathydock Optode sensors (NetCDF files from 2023-09-20)

The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories.  It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems.  This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea.  There are currently eleven deep water nodes plus four shallow water test nodes.  EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow.  This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, not applicable)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
DOX1 (oxygen concentration, Micromoles per litre)
... (10 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock, ADCP sensor (NetCDF files from 2023-09-20

The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories.  It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems.  This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea.  There are currently eleven deep water nodes plus four shallow water test nodes.  EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow.  This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
HEAD (Heading, degrees)
Head_QC (Heading quality code)
PITCH (degrees)
Pitch_QC (Pitch quality code)
... (26 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock_Bathybot Aquadopp sensor (NetCDF files from 2023-09-20)

EMSO-LO Western Ligurian : BathyBot, Aquadopp sensor (Network Common Data Format (NetCDF) files from 2023-04-28). The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, Not applicable)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
Position_QC (quality flag for position)
DEPH (depth of measurements, Metres)
Deph_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
Time_QC (Time quality flag)
EWCT (X_East eastward_sea_water_velocity, Metres per second)
NSCT (Y_North northward_sea_water_velocity, Metres per second)
... (26 more variables)


EMSO-LO Western Ligurian : BJS_Bathydock_Bathybot Microcat sensor (NetCDF files from 2023-09-20)

The European Multidisciplinary Seafloor and water column Observatory (EMSO) is a research infrastructure distributed throughout Europe for seabed and water column observatories. It aims to further explore the oceans, better understand the phenomena that occur on the seabed, and elucidate the critical role that these phenomena play in global Earth systems. This observatory is based on observation sites (or nodes) that have been deployed in strategic locations in European seas, from the Arctic to the Atlantic, from the Mediterranean to the Black Sea. There are currently eleven deep water nodes plus four shallow water test nodes. EMSO Western Ligurian (EMSO-WL) is one of these permanent underwater observatories located in the Ligurian Sea and is deployed off Toulon, France. This region was chosen for its particular scientific interests such as: seismicity, topography, turbidity, biodiversity, water mass dynamics and organic matter flow. This underwater observation network is located close by KM3NeT (https://www.km3net.org/) which has a modular topology designed to connect up to 120 neutrino detection units. Earth and Sea Science (ESS) instrumentation at the EMSO-WL station is based on two complementary components: an instrumented interface module (MII) and an autonomous instrumented line (ALBATROSS) as well as a junction box (BJS). The BathyFamily is a package of innovative multi-instrumented platforms to observe the deep sea. BathyBot is an Internet Operated Vehicle (IOV) deployed from a landing station (BathyDock), and close to BathyReef a 3D-printed biomimetic colonizer

cdm_data_type = TimeSeries
VARIABLES:
station_id (station name, N/A)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
POSITION_QC (quality flag for position)
depth (depth of measurements, m)
DEPH_QC (Profondeur quality flag)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (Time quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, Siemens per metre)
... (5 more variables)


Oceanographic mooring data from deployment of BB mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water temperature, currents along the water column

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Metres per second)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (deployment_latitude, degrees_north)
longitude (deployment_longitude, degrees_east)
depth (Depth of each measurement, m)
UVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
VVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
WVEL_ADCP (Vertical velocity of the water column (currents), Metres per second)
CurrVel_QC (Quality Control Flag of Current Velocity in the water column)
ECI_B1 (Acoustic backscatter in the water column, Counts)
ECI_B2 (Acoustic backscatter in the water column, Counts)
ECI_B3 (Acoustic backscatter in the water column, Counts)
ECI_B4 (Acoustic backscatter in the water column, Counts)
ECHO_QC (Quality Control Flag of Echo Intensity Signal in the water column)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)

CNR, National Research Council, Institute of Polar Science (CNR - ISP)


Oceanographic mooring data from deployment of BB mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water pressure, temperature, potential_temperature, practical salinity, density, turbidity and dissolved oxygen in sea-water

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Degrees Celsius)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
depth (Depth of each measurement, m)
AHGT (sea water pressure, dbar)
sea_water_pressure_QC (quality control flag of sea_water_pressure)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)
Temperature (Potential Temperature of the sea-water, Degrees Celsius)
PTEMP_QC (quality control flag of sea-water_potential_temperature)
PSAL (Salinity of the sea-water, Dimensionless)
PSAL_QC (quality control flag of pratical salinity of sea water)
SIGT (sea_water_density, Kilograms per cubic metre)
SIGT_QC (quality control flag of sea_water_density)
DOXY (Dissolved oxygen in the water column, Millilitres per litre)
DOXY_QC (quality control flag of Dissolved oxygen in the water column)
TSED (sea_water_turbidity, NTU)
TURB_QC (quality control flag of Turbidity of water)


Oceanographic mooring data from deployment of FF mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water temperature, currents along the water column

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Metres per second)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
depth (Depth of each measurement, m)
UVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
VVEL_ADCP (Horizontal velocity of the water column (currents), Metres per second)
WVEL_ADCP (Vertical velocity of the water column (currents), Metres per second)
CurrVel_QC (Quality Control Flag of Current Velocity in the water column)
ECI_B1 (Acoustic backscatter in the water column, Counts)
ECI_B2 (Acoustic backscatter in the water column, Counts)
ECI_B3 (Acoustic backscatter in the water column, Counts)
ECI_B4 (Acoustic backscatter in the water column, Counts)
ECHO_QC (Quality Control Flag of Echo Intensity Signal in the water column)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)


Oceanographic mooring data from deployment of FF mooring at the Southern Adriatic Sea (Mediterranean Sea). Mesured properties: sea-water pressure, temperature, potential_temperature, practical salinity, density, turbidity and dissolved oxygen in sea-water

cdm_data_type = TimeSeries
VARIABLES:
station_id (Id of the station in the TimeSeries, Degrees Celsius)
latitude (latitude position of the station, degrees_north)
longitude (longitude position of the station, degrees_east)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
depth (Depth of each measurement, m)
AHGT (sea water pressure, dbar)
sea_water_pressure_QC (quality control flag of sea_water_pressure)
TEMP (Temperature of the sea-water, Degrees Celsius)
TEMP_QC (quality control flag of sea-water_temperature)
Temperature (Potential Temperature of the sea-water, Degrees Celsius)
PTEMP_QC (quality control flag of sea-water_potential_temperature)
PSAL (Salinity of the sea-water, Dimensionless)
PSAL_QC (quality control flag of pratical salinity of sea water)
SIGT (sea_water_density, Kilograms per cubic metre)
SIGT_QC (quality control flag of sea_water_density)
DOXY (Dissolved oxygen in the water column, Millilitres per litre)
DOXY_QC (quality control flag of Dissolved oxygen in the water column)
TSED (sea_water_turbidity, NTU)
TURB_QC (quality control flag of Turbidity of water)


ESTOC Chlorophyll and Turbidity Data (at 100m) 2015

Sea water data collected at ESTOC mooring at 29.17 degrees North at 15.529 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
wetlabs_SNFLNTUSB3869 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC Chlorophyll and Turbidity Data (at 140m) 2016

Sea water data collected at ESTOC mooring at 29.193 degrees North at 15.608 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
wetlabs_SN4039 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC Chlorophyll and Turbidity Data (at 80m) 2017

Sea water data collected at ESTOC mooring at 29.18 degrees North at 15.518 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
wetlabs_SNFLNTUSB3869 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC Chlorophyll and Turbidity Data 2016

Sea water data collected at ESTOC mooring at 29.193 degrees North at 15.608 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
turnerdesigns_SN2180461 (Turner Designs Cyclops-7 chlorophyll fluorometer)
wetlabs_SNFLNTUSB3869 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC Chlorophyll and Turbidity Data 2017-2018

Sea water data collected at ESTOC mooring at 29.18 degrees North at 15.518 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
wetlabs_SNFLNTUSB4040 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


Sea water data collected at ESTOC mooring at 29.23 degrees North at 15.517 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
TEMP (Sea water temperature, degC)
CNDC (sea water electrical conductivity, S/m)
PSAL (sea water salinity, Dmnless)
TEMP_QC (Sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
seabirdscientific_SN15013 (Sea-Bird SBE 37 MicroCat SM-CT with optional pressure (submersible) CTD sensor series)
ESTOC_ODAS_Mooring_Platform


Sea water data collected at ESTOC mooring at 29.163 degrees North at 15.608 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
TEMP (Sea water temperature, degC)
CNDC (sea water electrical conductivity, S/m)
PSAL (sea water salinity, Dmnless)
TEMP_QC (Sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
seabirdscientific_SN14406 (Sea-Bird SBE 37 MicroCat IMP-CT-ODO (submersible) CTD sensor)
ESTOC_ODAS_Mooring_Platform


Sea water data collected at ESTOC mooring at 29.23 degrees North at 15.517 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
TEMP (Sea water temperature, degC)
CNDC (sea water electrical conductivity, S/m)
PSAL (sea water salinity, Dmnless)
TEMP_QC (Sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
seabirdscientific_SN9226 (Sea-Bird SBE 37 MicroCat SMP-CT with optional pressure (submersible) CTD sensor series)
ESTOC_ODAS_Mooring_Platform


Sea water data collected at ESTOC mooring at 29.17 degrees North at 15.529 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
TEMP (Sea water temperature, degC)
CNDC (sea water electrical conductivity, S/m)
PSAL (sea water salinity, Dmnless)
TEMP_QC (Sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
PSAL_QC (sea water salinity quality control flags)
seabirdscientific_SN9227 (Sea-Bird SBE 37 MicroCat SMP-CT with optional pressure (submersible) CTD sensor series)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD-Oxygen-Chlorophyll and Turbidity Data 2018-2019

Meteorological data collected at ESTOC mooring at 29.19 degrees North at 15.542 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
DOXY (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water, umol/l)
DOXY_TEMP (temperature of sensor for oxygen in sea water, degC)
TEMP (Sea water temperature, degC)
PSAL (sea water salinity, Dmnless)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
DOXY_QC (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water quality control flags)
DOXY_TEMP_QC (temperature of sensor for oxygen in sea water quality control flags)
TEMP_QC (Sea water temperature quality control flags)
PSAL_QC (sea water salinity quality control flags)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
seabirdscientific_SN14295 (Sea-Bird SBE 37 MicroCat SM-CT with optional pressure (submersible) CTD sensor series)
aanderaa_SN672 (Aanderaa 4835 oxygen optode)
wetlabs_SN4039 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD-Oxygen-Chlorophyll and Turbidity Data 2019

Meteorological data collected at ESTOC mooring at 29.177 degrees North at 15.518 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
DOXY (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water, umol/l)
DOXY_TEMP (temperature of sensor for oxygen in sea water, degC)
TEMP (Sea water temperature, degC)
PSAL (sea water salinity, Dmnless)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
DOXY_QC (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water quality control flags)
DOXY_TEMP_QC (temperature of sensor for oxygen in sea water quality control flags)
TEMP_QC (Sea water temperature quality control flags)
PSAL_QC (sea water salinity quality control flags)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
seabirdscientific_SN14294 (Sea-Bird SBE 37 MicroCat SM-CT with optional pressure (submersible) CTD sensor series)
aanderaa_SN736 (Aanderaa 4835 oxygen optode)
wetlabs_SNFLNTUSB3869 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
ESTOC_ODAS_Mooring_Platform


ESTOC CTD-Oxygen-Chlorophyll and Turbidity-Carbon System Data 2016

Oceanographic data collected at ESTOC mooring at 29.16 egrees North at -15.608 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
DOXY (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water, umol/l)
PCO2 (surface partial pressure of carbon dioxide in sea water, ppm)
TEMP (Sea water temperature, degC)
PSAL (sea water salinity, Dmnless)
PHPH (surface pH in sea water, pH units)
CPHL (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water, mg/m^3)
TUR4 (Turbidity of water in the water body, NTU)
DOXY_QC (The amount (volume, mass or quantity of matter) of dissolved oxygen per amount (volume or mass) of a body of water quality control flags)
PCO2_QC (surface partial pressure of carbon dioxide in sea water quality control flags)
TEMP_QC (Sea water temperature quality control flags)
PSAL_QC (sea water salinity quality control flags)
PHPH_QC (surface pH in sea water quality control flags)
CPHL_QC (The amount (mass or quantity of matter) of the pigment chlorophyll-a per amount (volume or mass) of a body of water quality control flags)
TUR4_QC (Turbidity of water in the water body quality control flags)
seabirdscientific_SN14297 (Sea-Bird SBE 37 MicroCat SM-CT with optional pressure (submersible) CTD sensor series)
jfeadvantech_SN0079 (JFE Advantech Rinko II {ARO-CAR/CAD} oxygen sensor)
sensorlab_SN041650014 (SensorLab SP200-SM (High accuracy Submarine) pH sensor)
wetlabs_SNFLNTUSB_4040 (WET Labs {Sea-Bird WETLabs} ECO FLNTU combined fluorometer and turbidity sensor)
prooceanus_SN28_090_45 (Pro-Oceanus CO2-Pro CV submersible pCO2 sensor)
ESTOC_ODAS_Mooring_Platform


Sea water data collected at ESTOC mooring at 29.23 degrees North at 15.517 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
TEMP (Sea water temperature, degC)
PSAL (sea water salinity, Dmnless)
PHPH (surface pH in sea water, pH units)
TEMP_QC (Sea water temperature quality control flags)
PSAL_QC (sea water salinity quality control flags)
PHPH_QC (surface pH in sea water quality control flags)
seabirdscientific_SN14293 (Sea-Bird SBE 37 MicroCat SM-CT with optional pressure (submersible) CTD sensor series)
sensorlab_SN041650013 (SensorLab SP200-SM (High accuracy Submarine) pH sensor)
ESTOC_ODAS_Mooring_Platform


Meteorological data collected by Bremen University at ESTOC mooring at 29.19 degrees North at 15.92 degrees W

cdm_data_type = Point
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
AIRT (Air temperature, degree_C)
ATMP (Atmospheric pressure at altitude, mBar)
RELH (Relative humidity, Percent)
AIRT_QC (Air temperature quality control flags)
ATMP_QC (Atmospheric pressure at altitude quality control flags)
RELH_QC (Relative humidity quality control flags)


Meteorological data collected at ESTOC mooring at 29.161 degrees North at 15.585 degrees W from 02-Jun-2014 to 22-Dec-2014

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
AIRT (Air temperature, degC)
RELH (Relative humidity, %)
ATMP (Atmospheric pressure at altitude, mBar)
WDIR (Wind from direction relative true north, deg T)
WSPD (Horizontal wind speed, m/s)
AIRT_QC (Air temperature quality control flags)
RELH_QC (Relative humidity quality control flags)
ATMP_QC (Atmospheric pressure at altitude quality control flags)
WDIR_QC (Wind from direction relative true north quality control flags)
WSPD_QC (Horizontal wind speed quality control flags)
vaisala_SNG0450011 (Vaisala HUMICAP 180R HMP155 humidity and temperature probe)
vaisala_SNG0520009 (Vaisala PTB110 barometer)
vaisala_SNJ3120014 (Vaisala WXT520 weather transmitter)
ESTOC_ODAS_Mooring_Platform


Meteorological data collected at ESTOC mooring at 29.16 degrees North at 15.5 degrees W

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
sensor_id (Identifier of the sensor that took the measurement)
platform_id (Platform where the sensor was deployed)
LGH4 (Photosynthetically active radiationÂ (PAR), umol/m^2/s)
WDIR (Wind from direction relative true north, deg T)
WSPD (Horizontal wind speed, m/s)
AIRT (Air temperature, degC)
ATMP (Atmospheric pressure at altitude, mBar)
RELH (Relative humidity, %)
LGH4_QC (Photosynthetically active radiationÂ (PAR) quality control flags)
WDIR_QC (Wind from direction relative true north quality control flags)
WSPD_QC (Horizontal wind speed quality control flags)
AIRT_QC (Air temperature quality control flags)
ATMP_QC (Atmospheric pressure at altitude quality control flags)
RELH_QC (Relative humidity quality control flags)
vaisala_SNK0610023 (Vaisala HUMICAP 180R HMP155 humidity and temperature probe)
rmyoung_SNWM115058 (R.M. Young 05103 Wind Monitor anemometer)
apogeeinstrumentsinc_SN4304 (Apogee SQ Quantum PAR sensor series)
vaisala_SNK0250013 (Vaisala PTB110 barometer)
vaisala_SNM0310241 (Vaisala HUMICAP 180R HMP155 humidity and temperature probe)
vaisala_SNM0310065 (Vaisala PTB110 barometer)
rmyoung_SN145936 (R.M. Young 05103 Wind Monitor anemometer)
apogeeinstrumentsinc_SN5429 (Apogee SQ Quantum PAR sensor series)
vaisala_SNJ3120014 (Vaisala WXT520 weather transmitter)
apogeeinstrumentsinc_SN6622 (Apogee SQ Quantum PAR sensor series)
ESTOC_ODAS_Mooring_Platform


Fluorometry data from a Turner Designs C3 sensor at OBSEA's Besos Buoy (30min average)

Data collected by a Turner Designs C3-SN2300642 fluorometer mounted at the Besos Buoy, on top of the OBSEA observatory, 30min average

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CDOM (The quantity of coloured organic compounds in solution in unit volume of any body of water, Parts per billion)
COIL (crude oil in sea water, Parts per billion)
RFUL (refined fuels in sea water, Parts per million)
TEMP (in situ sea water temperature, Degrees Celsius)
CDOM_QC (The quantity of coloured organic compounds in solution in unit volume of any body of water quality control flags)
COIL_QC (crude oil in sea water quality control flags)
RFUL_QC (refined fuels in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Fluorometry data from a Turner Designs C3 sensor at OBSEA's Besos Buoy (full data)

Data collected by a Turner Designs C3-SN2300642 fluorometer mounted at the Besos Buoy, on top of the OBSEA observatory, full data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
CDOM (The quantity of coloured organic compounds in solution in unit volume of any body of water, Parts per billion)
COIL (crude oil in sea water, Parts per billion)
RFUL (refined fuels in sea water, Parts per million)
TEMP (in situ sea water temperature, Degrees Celsius)
CDOM_QC (The quantity of coloured organic compounds in solution in unit volume of any body of water quality control flags)
COIL_QC (crude oil in sea water quality control flags)
RFUL_QC (refined fuels in sea water quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


Med Sea, Cretan Sea, NRT in situ Observations

Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PHPH (Ph, 1)
PHPH_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PHPH (Ph, 1)
PHPH_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PHPH (Ph, 1)
PHPH_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
... (24 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR
GDIR_QC
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Cretan Sea - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea, Hellenic Arc, NRT in situ Observations

Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0 (Spectral significant wave height (Hm0), m)
VHM0_QC (quality flag)
VMDR (Mean wave direction from (Mdir), degree)
VMDR_QC (quality flag)
VTM02 (Spectral moments (0,2) wave period (Tm02), s)
VTM02_QC (quality flag)
... (14 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DRYT (degree_C)
DRYT_QC
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0
VHM0_QC
VMDR
VMDR_QC
VTM02
VTM02_QC
... (14 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DRYT (degree_C)
DRYT_QC
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0
VHM0_QC
VMDR
VMDR_QC
VTM02
VTM02_QC
... (12 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0 (Spectral significant wave height (Hm0), m)
VHM0_QC (quality flag)
VMDR (Mean wave direction from (Mdir), degree)
VMDR_QC (quality flag)
VTM02 (Spectral moments (0,2) wave period (Tm02), s)
VTM02_QC (quality flag)
VTPK (Wave period at spectral peak / peak period (Tp), s)
VTPK_QC (quality flag)
... (12 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DRYT (degree_C)
DRYT_QC
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
VHM0
VHM0_QC
VMDR
VMDR_QC
VTM02
VTM02_QC
... (14 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (degree_C)
DRYT_QC
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GSPD
GSPD_QC
HCDT
HCDT_QC
HCSP
HCSP_QC
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
TUR4 (Turbidity, 1)
TUR4_QC (quality flag)
... (20 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS
ATMS_QC
DOX1 (Dissolved oxygen, ml l-1)
DOX1_QC (quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR
GDIR_QC
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES (Sea pressure, decibar)
PRES_QC (quality flag)
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


Med Sea - Hellenic Arc - Near Real Time (NRT) in situ Observations

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TIME_QC (quality flag)
POSITION_QC (Position quality flag)
depth (depth of measurements, m)
DEPTH_QC (quality flag)
ATMS (Atmospheric pressure at sea level, hPa)
ATMS_QC (quality flag)
DOX1
DOX1_QC
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (quality flag)
GDIR (Gust wind from direction relative true north, degree)
GDIR_QC (quality flag)
GSPD (Gust wind speed, m s-1)
GSPD_QC (quality flag)
HCDT (Current to direction relative true north, degree)
HCDT_QC (quality flag)
HCSP (Horizontal current speed, m s-1)
HCSP_QC (quality flag)
PRES
PRES_QC
PSAL (Practical salinity, 0.001)
PSAL_QC (quality flag)
TEMP (Sea temperature, degree_C)
TEMP_QC (quality flag)
... (22 more variables)


NEMO-SN1 Observatory CTD data (2002-2003)

The dataset contains sea bottom Conductivity, Temperature and Pressure data (about 1 m above the bottom) acquired through a SBE 37-SM installed on SN-1 station. The collection period ranges from October 2002 through February 2003.

cdm_data_type = TimeSeries
VARIABLES:
depth (depth of measurements, m)
longitude (longitude of measurements, degrees_east)
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
TEMP (temperature, degree_C)
CNDC (conductivity, MilliSiemens per centimetre)
PRES (pressure, Decibar)
DEPTH_QC (Depth quality flag)
CNDC_QC (Conductivity quality flag)
POSITION_QC (Position quality flag)
TEMP_QC (Temperature quality flag)
TIME_QC (Time quality flag)
PRES_QC (Pressure quality flag)

Istituto Nazionale Geofisica e Vulcanologia - Sez. Roma2


NEMO-SN1 Observatory CTD data (2012-2013)

The dataset contains sea bottom Conductivity, Temperature and Pressure data (about 1 m above the bottom) acquired through a SBE 37-SM installed on SN-1 station.

cdm_data_type = TimeSeries
VARIABLES:
depth (depth of measurements, m)
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
longitude (longitude of measurements, degrees_east)
TEMP (temperature, degree_C)
CNDC (conductivity, MilliSiemens per centimetre)
PRES (pressure, Decibar)
CNDC_QC (Conductivity quality flag)
PRES_QC (Pressure quality flag)
POSITION_QC (Position quality flag)
TEMP_QC (Temperature quality flag)
TIME_QC (Time quality flag)
DEPTH_QC (Depth quality flag)


NEMO-SN1 Observatory Observatory Pressure Gauge data

This sensor measures the hydrostatic (water column) pressure exerted on the sensor resulting from the pressure of water above its position and the atmospheric air pressure acting on the sea surface.

cdm_data_type = TimeSeries
VARIABLES:
latitude (latitude of measurements, degrees_north)
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
PRES (pressure, decibar)
TIME_QC (Time quality flag)
POSITION_QC (Position quality flag)
DEPTH_QC (Depth quality flag)
PRES_QC (Pressure quality flag)


Physicochemical data from an SA8065 multiparameter probe at OBSEA's Besos Buoy (30min average)

Physicochemical data collected by an SA8065-SN0000 multiparameter probe at the Besos Buoy, on top of the OBSEA observatory, 30min average

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
TEMP (in situ sea water temperature, Degrees Celsius)
CNDC (sea water electrical conductivity, Siemens per metre)
DOXY (saturation of oxygen in sea water, Percent)
ALKY (Minus the log of the hydrogen ion concentration (moles per litre) in the water column., pH units)
WBRX (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species, Millivolts)
TURB (Turbidity of water in the water body, Nephelometric Turbidity Units)
depth_QC (depth of measurements quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
DOXY_QC (saturation of oxygen in sea water quality control flags)
ALKY_QC (Minus the log of the hydrogen ion concentration (moles per litre) in the water column. quality control flags)
WBRX_QC (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species quality control flags)
TURB_QC (Turbidity of water in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


Physicochemical data from an SA8065 multiparameter probe at OBSEA's Besos Buoy (full data)

Physicochemical data collected by an SA8065-SN0000 multiparameter probe at the Besos Buoy, on top of the OBSEA observatory, full sensor data

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
TEMP (in situ sea water temperature, Degrees Celsius)
CNDC (sea water electrical conductivity, Siemens per metre)
DOXY (saturation of oxygen in sea water, Percent)
ALKY (Minus the log of the hydrogen ion concentration (moles per litre) in the water column., pH units)
WBRX (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species, Millivolts)
TURB (Turbidity of water in the water body, Nephelometric Turbidity Units)
depth_QC (depth of measurements quality control flags)
TEMP_QC (in situ sea water temperature quality control flags)
CNDC_QC (sea water electrical conductivity quality control flags)
DOXY_QC (saturation of oxygen in sea water quality control flags)
ALKY_QC (Minus the log of the hydrogen ion concentration (moles per litre) in the water column. quality control flags)
WBRX_QC (A measure of the tendency of any body of fresh or salt water to either gain or lose electrons when it is subject to change by introduction of a new species quality control flags)
TURB_QC (Turbidity of water in the water body quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)


SmartBay Observatory NRT sensor feed - 1 day average - all sensors

The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This dataset comprises daily mean of data collected from the SmartBay Observatory site using an Idronaut Ocean-Seven 304 plus CTD, Sea_Bird SBE16plus CT, Sea-Bird SBE43 dissolved oxygen sensor, WetLabs ECO-FL, Contros pCO2, Kongsberg ADCP and icListen hydrophone sensors.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
transect (Named transect of repeat stations, Not applicable)
station_id (Station name, Not applicable)
site_bathy_depth (sea floor depth below sea surface, m)
... (58 more variables)


SmartBay Observatory NRT sensor feed - 1 hour average - all sensors

The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This dataset comprises hourly mean of data collected from the SmartBay Observatory site using an Idronaut Ocean-Seven 304 plus CTD, Sea_Bird SBE16plus CT, Sea-Bird SBE43 dissolved oxygen sensor, WetLabs ECO-FL, Contros pCO2, Kongsberg ADCP and icListen hydrophone sensors.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
transect (Named transect of repeat stations, Not applicable)
station_id (Station name, Not applicable)
site_bathy_depth (sea floor depth below sea surface, m)
... (58 more variables)


SmartBay Observatory NRT sensor feed - 15 minute average - all sensors

The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This dataset comprises 15 minute mean of data collected from the SmartBay Observatory site using an Idronaut Ocean-Seven 304 plus CTD, Sea_Bird SBE16plus CT, Sea-Bird SBE43 dissolved oxygen sensor, WetLabs ECO-FL, Contros pCO2, Kongsberg ADCP and icListen hydrophone sensors.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
transect (Named transect of repeat stations, Not applicable)
station_id (Station name, Not applicable)
site_bathy_depth (sea floor depth below sea surface, m)
... (58 more variables)


SmartBay Observatory NRT sensor feed - ADCP data

The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. A Teledyne RDI Workhorse Broadband 600KHz acoustic Doppler current profiler (ADCP ) is mounted on the observatory infrastructure. It is approximately two metres above the seabed, looking up towards the sea surface. Data are collected every minute for 1.0m depth bins from approx. 1 metre above the instrument to the surface. Data are collected in RDI's PD0 binary format (more information is available from the link: http://spiddal.marine.ie/data.html#adcp). The .PD0 raw files are processed as they are collected and the real time values for the Near Surface and Mid Water Current Speeds and Directions are extracted. The extracted values are displayed in near-real-time on smartbay.marine.ie. The processed data is also provided via an ERDDAP data server allowing the data to be downloaded in a range of open formats. The sensor is deployed on the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
... (42 more variables)


SmartBay Observatory NRT sensor feed - Contros pCO2 data

The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. A CONTROS HydroC CO2 sensor was installed on the SmartBay cabled observatory in June 2020. The sensor is connected to the fibre and power cable and is transmitting real time high frequency partial pressure of carbon dioxide {CO2 CAS 124-38-9} {pCO2} data in the water body at 25 m depth on a continuous basis. The sensor is deployed on the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
transect (Named transect of repeat stations, Not applicable)
... (12 more variables)


SmartBay Observatory NRT sensor feed - Hydrophone Sound Pressure Level data

The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This dataset comprises of processed acoustic data that has been collected from the SmartBay Observatory using an icListen HF Smart Hydrophone – a digital hydrophone that processes and stores acoustic data. The dataset comprises of processed data, collected from the SmartBay Observatory since its installation in 2015. The wide frequency range hydrophone is installed on a separate lander approximately 30m away from the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water at 53 degrees 13.640'N 9 degrees 15.979'W.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
... (22 more variables)


SmartBay Observatory NRT sensor feed - Idronaut CTD data

The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This CTD (Conductivity, Temperature, Depth) and Oxygen Dataset comprises of the raw data that is collected from the Galway Observatory site using an Idronaut Ocean-Seven 304 plus Conductivity-Temperature-Depth (CTD) sensor probe. The sensor measures the temperature and conductivity of the seawater. The conductivity is used to calculate an estimate of the salinity. The pressure exerted by the seawater above is used to calculate the depth of the sensor, and these parameters are also used to estimate the speed of sound within the sea. The Ocean-Seven 304 Plus CTD has also been equipped with a polarographic IDRONAUT dissolved oxygen sensor which measure the dissolved oxygen concentration of the seawater. The sensor is deployed on the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
... (28 more variables)


SmartBay Observatory NRT sensor feed - SBE16plus CTD data

The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. This CTD (Conductivity, Temperature, Depth) and Oxygen Dataset comprises of the raw data that is collected from the Galway Observatory site using a SeaBird 16plus Conductivity-Temperature-Depth (CTD) sensor probe. The sensor measures the temperature and conductivity of the seawater. The conductivity is used to calculate an estimate of the salinity. The pressure exerted by the seawater above is used to calculate the depth of the sensor, and these parameters are also used to estimate the speed of sound within the sea. The SBE16plus CTD has also been equipped with a SBE43 dissolved oxygen sensor which measures the dissolved oxygen concentration of the seawater. The sensor is deployed on the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
... (27 more variables)


SmartBay Observatory NRT sensor feed - WetLabs ECO-FLNTU fluorescence and turbidity data

The SmartBay Observatory in Galway Bay is an underwater observatory which uses cameras, probes and sensors to permit continuous and remote live underwater monitoring. The observatory was installed in 2015 on the seafloor 1.5km off the coast of Spiddal, Co. Galway, Ireland at a depth of 20-25m. Underwater observatories allow ocean researchers unique real-time access to monitor ongoing changes in the marine environment. The SmartBay Observatory is an important contribution by Ireland to the growing global network of real-time data capture systems deployed in the ocean. Data relating to the marine environment at the SmartBay Observatory site is transferred in real-time through a fibre optic telecommunications cable to the Marine Institute headquarters and then made publically available on the internet. The data includes a live video stream, the depth of the observatory node, the water temperature and salinity, and estimates of the chlorophyll and turbidity levels in the water which give an indication of the volume of phytoplankton and other particles, such as sediment, in the water. Maintenance take place on the observatory every 18 to 24 months. A WetLabs ECO-FLNTU is installed on the observatory infrastructure. It measures the fluorescence of the seawater to give an estimate of the volume of chlorophyll present (indicative of the amount of phytoplankton in the seawater) and it measures turbidity, or the 'cloudiness' of the seawater, caused by the presence of particles such as sediment from the seabed suspended in the water. The sensor is deployed on the EMSO Smartbay Cable End Equipment Node in Galway Bay in approx. 25m depth of water.

cdm_data_type = TimeSeries
VARIABLES:
midgid (Marine Institute Data Granule Identifier, Not applicable)
SeaVox_SeaArea (SeaVox Sea-Area, Not applicable)
SeaVox_SeaArea_urn (SeaVox Sea-Area code value, Not applicable)
ICES_ecoregion (Not applicable)
ICES_area (Not applicable)
ICES_statistical_rectangle (Not applicable)
MSFD_region (Marine Strategy Framework Directive region, Not applicable)
MSFD_subregion (Marine Strategy Framework Directive sub-region, Not applicable)
WFD_waterbody_type (Water Framework Directive waterbody type, Not applicable)
WFD_waterbody_name (Water Framework Directive waterbody name, Not applicable)
... (15 more variables)


SPL data from a Naxys Hydrophone at OBSEA (30min average)

Sound Pressure Level (ambient noise) from hydrophone data collected at OBSEA by a Naxys Ethernet 02345 Hydrophone and processed in real-time using the SWE Bridge software, 30min average. The SPL values are calculated with a time-window of 10 seconds.

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
SPL_ALL
SPL_63 (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_125 (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_2000 (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_ALL_QC
SPL_63_QC (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_125_QC (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_2000_QC (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


SPL data from a Naxys Hydrophone at OBSEA (full data)

Sound Pressure Level (ambient noise) from hydrophone data collected at OBSEA by a Naxys Ethernet 02345 Hydrophone and processed in real-time using the SWE Bridge software, full data.  The SPL values are calculated with a time-window of 10 seconds.

cdm_data_type = Point
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
latitude (latitude of measurements, degrees_north)
longitude (longitude of measurements, degrees_east)
depth (depth of measurements, m)
SPL_ALL
SPL_63 (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_125 (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_2000 (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.",, Decibels)
SPL_ALL_QC
SPL_63_QC (Sound pressure level (SPL) of ambient noise at the 63Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_125_QC (Sound pressure level (SPL) of ambient noise at the 125Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
SPL_2000_QC (Sound pressure level (SPL) of ambient noise at the 2000Hz-centered frequency band the with a time window of 10 seconds. The SPL values are computed using the Welch method with a time window of 10 seconds, using 1-second segments, Hann window and 50% overlap.", quality control flags)
latitude_QC (latitude of measurements quality control flags)
longitude_QC (longitude of measurements quality control flags)
depth_QC (depth of measurements quality control flags)


This dataset contains data from a single array mooring covering the depths between 500 m and 2000 m (bottom) at Station M (OWSM) in the Norwegian Seas located at 66 N, 2 E. Measurements frequency is 1/1 hr for the hydrography (temperature, salinity, pressure) and 1/12 hr for the carbon measurements.At 800 m and 1200 m nominal depth, the pressure has been calculated based on distance between the SBE sensors. The CO2 sensor data (at 500 m nominal depth) are validated by comparing the values towards calculated pCO2 from discrete Dissolved Inorganic Carbon (DIC) and Total Alkalinity (TA) taken multiple times a year. Calibrated values are available. Data from 2020 onwards are part of the NorEMSO project. The NorEMSO data is part of EMSO-ERIC.

cdm_data_type = TimeSeries
VARIABLES:
SENSOR_ID (Instrument Id)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (Nominal depth of measurements, m)
PRES (pressure, decibar)
PRES_QC (pressure quality flag)
PSAL (salinity, PSU)
PSAL_QC (salinity quality flag)
CNDC (conductivity, mS/cm)
CNDC_QC (conductivity quality flag)
TEMP (temperature, degree_C)
TEMP_QC (temperature quality flag)
POSITION_QC (Position quality flag)
FCO2 (fugacity of CO2 in water, microatmospheres)
FCO2_QC (fugacity of CO2 quality flag)
PREM (pressure at CO2 sensor equilibrator membrane, millibars)
PREM_QC (pressure at CO2 sensor equilibrator membrane quality flag)
DEPTH_QC (Depth quality flag)


Svinøy North hydrography and currents data.

This dataset contains current and hydrography data from a single array mooring (Svinøy North) located in the Svinøy Section current meter mooring array at 62.83 N, 4.36 E. It's part of the long-term monitoring timeseries of the Norwegian Atlantic Slope Current and transport estimation that started in 1995. Data from 2020 onwards are part of the NorEMSO project.

cdm_data_type = TimeSeries
VARIABLES:
SENSOR_ID (Instrument Id)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (Nominal depth of measurements, m)
CDIR (Current direction as degrees from North, degree)
CDIR_QC (Current direction as degrees from North quality flag)
PSAL (salinity, PSU)
PSAL_QC (salinity quality flag)
PRES (pressure, decibar)
PRES_QC (pressure quality flag)
CSPD (Current speed, m/s)
CSPD_QC (Current speed quality flag)
TEMP (temperature, degree_C)
TEMP_QC (temperature quality flag)
POSITION_QC (Position quality flag)
DEPTH_QC (Depth quality flag)


Svinøy South hydrography and currents data

This dataset contains current and hydrography data from a single array mooring (Svinøy South) located in the Svinøy Section current meter mooring array at 62.81 N, 4.27 E. It's part of the long-term monitoring timeseries of the Norwegian Atlantic Slope Current and transport estimation that started in 1995. Data from 2020 onwards are part of the NorEMSO project.

cdm_data_type = TimeSeries
VARIABLES:
SENSOR_ID (Instrument Id)
time (time of measurement, seconds since 1970-01-01T00:00:00Z)
latitude (Latitude of each location, degrees_north)
longitude (Longitude of each location, degrees_east)
depth (Nominal depth of measurements, m)
CDIR (Current direction as degrees from North, degree)
CDIR_QC (Current direction as degrees from North quality flag)
PSAL (salinity, PSU)
PSAL_QC (salinity quality flag)
PRES (pressure, decibar)
PRES_QC (pressure quality flag)
CSPD (Current speed, m/s)
CSPD_QC (Current speed quality flag)
TEMP (temperature, degree_C)
TEMP_QC (temperature quality flag)
POSITION_QC (Position quality flag)
DEPTH_QC (Depth quality flag)


Data from W1M3A observatory (012014-062015)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


Data from W1M3A observatory (062015-062016)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


Data from W1M3A observatory (072016-052017)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


Data from W1M3A observatory (052017-062018)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
RELH_QC (Relative humidity quality flag)
SINC (Shortwave/solar incoming radiation, Watts per square metre)
SINC_QC (Shortwave radiation quality flag)
LINC (Longwave/atmospheric incoming radiation, Watts per square metre)
LINC_QC (Longwave radiation quality flag)
PRRT (Hourly precipitation rate (liquid water equivalent), Millimetres per hour)
PRRT_QC (Precipitation quality flag)


Data from W1M3A observatory (102020-072021)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, NTU)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
... (7 more variables)


Data from W1M3A observatory (072021-042022)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
PSAL (practical salinity, Parts per thousand)
PSAL_QC (Salinity quality flag)
FLU2 (Chlorophyll-a fluorescence, mg m-3)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, NTU)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
DRYT_QC (Air temperature quality flag)
RELH (Relative humidity, Percent)
... (7 more variables)


Data from W1M3A observatory (102023-052024)

cdm_data_type = TimeSeries
VARIABLES:
station_id (Not applicable)
time (Time of measurement, seconds since 1970-01-01T00:00:00Z)
time_QC (Time quality flag)
latitude (Latitude of measurements, degrees_north)
longitude (Longitude of measurements, degrees_east)
position_QC (Position quality flag)
depth (Depth of measurements, m)
DEPTH_QC (Depth quality flag)
TEMP (temperature, degree_C)
TEMP_QC (Temperature quality flag)
CNDC (conductivity, MilliSiemens per centimetre)
CNDC_QC (Conductivity quality flag)
DOX1 (Dissolved oxygen, Millilitres per litre)
DOX1_QC (Conductivity quality flag)
FLU2 (Chlorophyll-a fluorescence, Milligrams per cubic metre)
FLU2_QC (Chlorophyll-a fluorescence quality flag)
TUR4 (Turbidity of water in the water body, Nephelometric Turbidity Units)
TUR4_QC (Turbidity quality flag)
PRES (pressure exterted by seawater and overlying atmosphere, Decibars)
PRES_QC (Sea pressure quality flag)
ATMS (Atmospheric pressure at sea level, Hectopascals)
ATMS_QC (Atmospheric pressure quality flag)
WSPD (Horizontal wind speed, Metres per second)
WSPD_QC (Horizontal wind speed quality flag)
WDIR (Wind from direction relative true north, degrees)
WDIR_QC (Wind direction quality flag)
DRYT (Air temperature in dry bulb, degree_C)
... (9 more variables)